RDB, DEXT problem

[nickshi]

Hi, i actived DEXT=YES in LD 16 RDB. But i can only get "P+8 digits" on M2008 display, it missed last two digits of the dialed number. How can i solve this? Thanks.
and one more question i asked before, the Opt11C equiped with Meridian Mail, when the call dails in, MM answers the call, and transfer the call to extension, if DEXT=NO, the terminated telephone gets nothing on the display; if DEXT=YES, the telephone shows "P+8 Digits" at the beginning of the display. What's wrong with the CLID settings? Thanks.

 

[johnpoole]

clid is outgoing digits, inbound digits are from the provider, ld 96 enl msgi x with x=to the d channel will show you inbound digits

john poole
bellsouth business
columbia,sc

 

[nickshi]

DCH 10 UIPE_IMSG CC_SETUP_IND REF 00000280 CH 1 5 TOD 0:31:34
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:58485555 NUM PLAN: E164
CALLED #:2158584130 NUM PLAN: E164

DCH 10 UIPE_IMSG CC_SETUPCOMP_IND REF 00000280 CH 1 5 TOD 0:31:34

DCH 10 UIPE_IMSG CC_DISC_IND REF 00000280 CH 1 5 TOD 0:32:04
CAUSE: #16 - NORMAL CALL CLEARING
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

on M2008, DEXT=Yes,
Question 1:
If the call answered and transfered by Meridian Mail, We can only get "P21585841" at the beginning of the display.
? How to make sure that the calling party number will be shown on display?
Question 2:
If using IDC 2158584130 4130, "58485555 P21585841" displayed on DN4130(M2008D).
? How to show a full Dailed number?

Thanks.

 

[johnpoole]

an idc table blows away your original dialed number, looks like the display you need will be done with pri's

john poole
bellsouth business
columbia,sc

 

[nickshi]

Yes, we're using PRI Trunk.
IDC 1
2158584130 4130 (Calling number is ok on M2008, and part of Dialed number displayed.)
2158584131 4131 (Same as 4130)
2158584132 7001 ACD NCFW 7000 TD200 (No calling number, and part of Dialed number.)
2158584133 7003 ACD NCFW 7000 TD300 (Same as 7001)
I tried on a M3904, it shows all digits of the Dailed Number, but no Calling Number....
If the IDC table causes this, may i remove IDC, and try a new solution? Or, if the calling line number is ok, it'll be appreciated.
Thanks.

 

[johnpoole]

is the idc is changing the inbound digit string, might try a single number as an acd, or local steering code

john poole
bellsouth business
columbia,sc

 

[nickshi]

You mean delete ACDN 7003, only leave 7001 in system & Meridian Mail? Thanks...