kflounders
Programmer
Is there any reason that two 7.0 Legends networked together can't use RFC from side B to an outbound trunk on side A?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
RCF with Networked system
- Thread starter kflounders
- Start date
- Status
If you can call out from side B by just dialing 9 and making the call, then you should be able to RCF from side B as well.
The problem maybe in the way the RCF is being set up.
Is the Extension wanting to do this set for RCF?
Is the user pressing # (Pound) at the end of the dialing sequence?
Those are some things to consider.
The problem maybe in the way the RCF is being set up.
Is the Extension wanting to do this set for RCF?
Is the user pressing # (Pound) at the end of the dialing sequence?
Those are some things to consider.
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Locked
- Question