Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
"Number of CMS measured trunks exceeds maximum" 1
- Thread starter AvayaDude
- Start date
dmoore7648
IS-IT--Management
You will need to contact your BP or Avaya and increase you RTU.
-
1
- #3
You have to change the number of measured trunk in the "Data Storage Allocation" form in the CMS. You'll find this under "System Setup."
Only problem is, you have to turn off "Data Collection" and change "CMS State" to single user mode before you can make the changes. Then you have to change them back after the changes are made.
You'll also want to make sure that you have plenty of space in "Free Space Allocation" after you make the change to increase your storage.
Only problem is, you have to turn off "Data Collection" and change "CMS State" to single user mode before you can make the changes. Then you have to change them back after the changes are made.
You'll also want to make sure that you have plenty of space in "Free Space Allocation" after you make the change to increase your storage.
dmoore7648
IS-IT--Management
Sorry, thinking something else.. Marcell55 is correct.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
