The last time I was onthe Forum. FreddyV wrote a heap about ai2cnt. I still am not able to get the Monitor to shift from VGA (default mode) to EGA despite using a V330 AGP card which is 100% compatible according to the Microsoft Official HCL listing ??
The AGP is Viper V330 ( NIVA 128 Chipset) and the MOtherboard is also onthe HCL list GA-6BXD. But I keep getting this "!" against the AGP and the above mysterious "ai2cnt" hidden driver ?. Prior to this it worked 100% with Win98 SE. Alsot he V330 too worked fined. Looks like the only solution is to dual boot the PC?
Q1: Hope to hear from anyone and Freddy V onteh 2IC or ai2cnt problem. What has the NVIDIA WDM go tot do with ai2cnt driver?
---------------- THINGS I so Far have Found out -------
I also get STOP ERROR (blue sheet) :
0x000000CA (0x00000001,0x81817b30)if the connect my Sony CD-R/RW CRX-175M to the Power supply. If I disconnect this CR R/RW drive is 100% boot up no error. Sony tell me my drive may have fault ??? It this possible ?
For Stop Code 0x000000CA see:
Parameter 1 is 1, so multiple PDOs (physical device objects)
have been detected by the driver for your CD-RW drive. Sounds more like a software problem to me???? ....However the Win2000 HCL list :
show the following: Sony CD-R/RW CRX175E [ATA/ATAPI]
is 100% compatible ??? This is certainly crap !?
ai2cnt seem to be the ONLY missing links to this problem. Has anyone experienced this. MY Motherboard is also on the HCL for Win 2000 which is GA-6BXD
Hope to here from the Forum in due course.
Cheers, Ken
The AGP is Viper V330 ( NIVA 128 Chipset) and the MOtherboard is also onthe HCL list GA-6BXD. But I keep getting this "!" against the AGP and the above mysterious "ai2cnt" hidden driver ?. Prior to this it worked 100% with Win98 SE. Alsot he V330 too worked fined. Looks like the only solution is to dual boot the PC?
Q1: Hope to hear from anyone and Freddy V onteh 2IC or ai2cnt problem. What has the NVIDIA WDM go tot do with ai2cnt driver?
---------------- THINGS I so Far have Found out -------
I also get STOP ERROR (blue sheet) :
0x000000CA (0x00000001,0x81817b30)if the connect my Sony CD-R/RW CRX-175M to the Power supply. If I disconnect this CR R/RW drive is 100% boot up no error. Sony tell me my drive may have fault ??? It this possible ?
For Stop Code 0x000000CA see:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/ddtools/hh/ddtools/bccodes_9h9j.asp
Parameter 1 is 1, so multiple PDOs (physical device objects)
have been detected by the driver for your CD-RW drive. Sounds more like a software problem to me???? ....However the Win2000 HCL list :
show the following: Sony CD-R/RW CRX175E [ATA/ATAPI]
is 100% compatible ??? This is certainly crap !?
ai2cnt seem to be the ONLY missing links to this problem. Has anyone experienced this. MY Motherboard is also on the HCL for Win 2000 which is GA-6BXD
Hope to here from the Forum in due course.
Cheers, Ken
