Question on System Status

[m4ilm4n]

When running the System Status app on Windows, selecting Active Calls dynamically shows the current active calls.

I have ported the Java app and all related files to a Raspberry Pi with the OpenJDK installed and it appears to work nominally. However, the Active Calls screen will show current calls for only about ten seconds, then drop into a "calls initiated/calls cleared" screen.

Is there a setting somewhere that controls that display?

 

[amriddle01]

No, and what you're doing is not a supported process so it's unlikely to change

 

[m4ilm4n]

Yeah I know it's not supported, but I figured a Java app is "write once run anywhere" ( - thank you very much, I'm here 'til Tuesday. Try the veal, tip your waitress).

I was just wondering if anyone had seen that behavior in the screen.

 

[IPGuru]

System Status is performing working with a propitiatory network API tat is completely undocumented.

considering Avaya cant get everything right in this app (time errors, qos statistic errors and a number of other quirks) i doubt that trying to get it to operate on an unintended system is going to be successful.

I am surprised you have manager to get it working at all.



Do things on the cheap & it will cost you dear

 

[m4ilm4n]

OK - it's not just the system on the Pi, I switched back to a Windows platform and it did the same thing, so I have some other things I need to look at.