Question about Printers in Fox

[jaa69]

I have a system with maybe 50 reports or so. When I give it to my CLient he says that after it prints he has to hit the printer button to make the report printout. My test system is using a HP 4L printer which does just fine. on his system he is using a HP 2100. When I open the report itself as a table in the first record the expr field. It has a line 'Device' and has my printer in it. Could this becauseing the problem of not being compatable? If so is it safe to just delete the line? How can I avoid this line being put in automatically. I'm working with Fox 7.0


Thanks

 

[SnyAc]

Check the FAQ for the thread on hacking the FRX file to remove the printer specific info. Andy Snyder
SnyAc Software Services

http://www.snysoft.com

 

[jaa69]

Not sure how to access the Faqs, anyone have a direct link?

 

[Mike Gagnon]

jaa69

Take a look at the third tab at the top of this page, other the faq184-581 that was mentionned, you may find other faq's that may help you on other problems. Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.

 

[jaa69]

That last solution seemed to work. It did remove a little more the first time I ran it than I wanted it to. I jsut wanted the printer name removed. I modified it to do just that. Thank you very much.


Vegas Baby Vegas