Query 9611 phone via keypad for extension?

[Voice99]

Can I query a 9611 IP phone via the keypad so that it tells me what extension is programmed? I used to be able to do this on the 4610's and 4620's.

 

[smokinjoe2938]

once it is logged in it should display the extension if I am reading this correctly

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.

 

[Voice99]

Guess I was thinking of the digital phones.......duh...Thanks for the feedback. I now remember it was the 6408 phones, not the IP phones!

 

[Mitch672]

on any CM phone that has a display, there is a feature called "Self Station Display?", it must be enabled on "change sys feat":

display system-parameters features Page 1 of 18
FEATURE-RELATED SYSTEM PARAMETERS
Self Station Display Enabled? y

then you administer a "feature" code for it, via "change features", feature name is: "Self Station Display Activation:"

If the phone is logged in, the port and extension # will show up, if its isn't jus the port # will show up (for digital phones)



Mitch

AVAYA Certified Expert