1st I hope on in the right forum for this question. I have qsig setup and running between a 1000m and Avaya 8300 gateway switch to an Avaya Aura Communication Manager Rel 5.2.1. I have a slight issue: Caller from the Avaya dials a Nortel user. He enter the Avaya access code 123 and the Nortel phone extension 5678 (named "TEST PHONE"). The Nortel user is on the phone and the call hunts to line two. On the avaya phone display reads "1235678 forward" while the phone rings. when answered the Avaya phone displays the Nortel ext name "TEST PHONE forward". My question is there any way to not have the "forward" or these type messages ignored so they do not appear on the Avaya display.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
QSIG Question
- Thread starter Wings08
- Start date
Better try this forum;
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
- Status
