Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

QSIG on Meridian

Status
Not open for further replies.
VicKol

VicKol

Programmer
Joined
Feb 25, 2011
Messages
5
Location
US
Hi,

We are trying to configure PRI with QSIG on Meridian to get notifications on hold/retrieve and transfer/forwarding. I'm looking at the documentation and my impression that hold/retrieve indication is not available at all and transfer/forwarding can be only indicated through E1 (requires PRI2).

I would appreciate any comments on this matter.

Thanks,
Vic
 
Status
Not open for further replies.

Similar threads

LidLock Technologies
  • Locked
  • Question Question
Meridian Mail Issues
Replies
3
Views
618
LidLock Technologies
LidLock Technologies
P
  • Question Question
Can`t work out the problem with DN (Meridian 81c)
Replies
5
Views
266
merton888
M
LidLock Technologies
  • Locked
  • Question Question
Meridian 1 Basic programming
2
Replies
26
Views
2K
bignose21
bignose21
S
  • Locked
  • Question Question
Nortel Meridian + Norstar Flash Issue
Replies
4
Views
1K
Synapt
S
VRRyan
  • Locked
  • Question Question
Nortel Meridian 1 password recovery
Replies
7
Views
874
rhne51
rhne51

Part and Inventory Search

Sponsor

Back
Top