QoS on Site to Site VPN using Cisco 871 and Cisco Pix

[hall5942]

We have a site to site VPN between a Cisco 871 and a Cisco Pix. I want to be able to setup Qos on both sides for Vo/IP. The local IPs on 1 side is 192.168.1.0/24 and on the remote is 192.168.2.0/24. The local phone system has a IP of 192.168.1.50 and the remote of 192.168.2.50. Can I setup bandwidth allacation of 200Kb whenever anything goes from phone system to phone system? If so how?

Thanks

 

[ADB100]

You can probably create an egress service policy to prioritise the traffic out however what happens over the Internet is anyones guess... Unless you use the same ISP for each site and you have some sort of SLA with them?

As long as you have IOS 12.2 or later you should be able to configure the QoS Service-Policy, to do this on the PIX you need PIX 7.0 or later.

HTH

Andy