Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

QOS on 450 stacked with BPS

Status
Not open for further replies.
mucka

mucka

Technical User
Joined
Dec 3, 2001
Messages
76
Location
GB
Question for johnjohn (or anyone)on a previous thread.

JohnJohn , you say BPS stacked with 450 will give you QOS on the 450 , how does this work ? & which firmware versions needed for it .
Thanks in anticipation

Mucka
 
Sort by date Sort by votes
Mucka,

The BPS has more advanced QoS support than the 450 and has additional port queues, 4 queues on 10/100 ports and 8 on the Gigabit MDA, whereas the 450 has 2 I believe. This enables better granularity when setting up your QoS.

Numptie

PS I thought Widnes were unlucky.
 
Upvote 0 Downvote
We have BPS+450 stacks.

A Nortel engineer told me that we should only use the BPS for QOS. Meaning, plug in your IP telephony equipment into the BPS and let the 450 handle straight Data traffic.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K
  • Locked
  • Question Question
FreePBX Asterisk SIP trunk with IPO 500 outbound calling
Replies
1
Views
381
Firebird Scrambler
Firebird Scrambler
UnderTheBusAsUsual
  • Locked
  • Question Question
Avaya IPO with OneCom and Gamma SIP trunks
Replies
1
Views
897
Firebird Scrambler
Firebird Scrambler
anthony123
  • Locked
  • Question Question
No Audio on Avaya Phones at Remote Site
Replies
2
Views
891
anthony123
anthony123
G450
  • Locked
  • Question Question
BCM 450 not dialing local 10 digit number on a PRI
Replies
0
Views
271
G450
G450
CalebNT
  • Locked
  • Question Question
4526GTX-PWR/4500 Series Firmware
Replies
1
Views
1K
dialtonebone
dialtonebone

Part and Inventory Search

Sponsor

Back
Top