Guest_imported
New member
- Jan 1, 1970
- 0
Hey can anybody give me some tips, we are about to put paradox up to be used in
a multi-user environment for the first time.
Thanks!
a multi-user environment for the first time.
Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Putting paradox up in a multi-user environment
- Thread starter Guest_imported
- Start date
- Status
What version of Paradox?
1. Common Idapi file on network. This is point of personal preference. I like it, some others don't. I like it because I don't like going around to all the workstations to make changes, or pushing them out individually.
2. Common netfile - all workstations must share the same netfile.
3. I like keeping all my forms, reports and data on the network. It's easier to back-up and make changes. Some people like to keep the forms and report on the workstation. Again, this is just easier for me.
4. Permissions. Make certain that everyone has permission to use any network drive that your Paradox application needs.
5. Paradox takes care of most housekeeping (locks, etc...) so the transition should be fairly easy. If you havn't done network stuff before, you may encounter some design flaws that give you trouble because you didn't anticipate the multi-user environment. Just post specific issues and the folks here will do our best to answer.
Mac
"Do not delve too deeply in the arts of your enemy and so become ensnared by them"
langley_mckelvy@cd4.co.harris.tx.us
1. Common Idapi file on network. This is point of personal preference. I like it, some others don't. I like it because I don't like going around to all the workstations to make changes, or pushing them out individually.
2. Common netfile - all workstations must share the same netfile.
3. I like keeping all my forms, reports and data on the network. It's easier to back-up and make changes. Some people like to keep the forms and report on the workstation. Again, this is just easier for me.
4. Permissions. Make certain that everyone has permission to use any network drive that your Paradox application needs.
5. Paradox takes care of most housekeeping (locks, etc...) so the transition should be fairly easy. If you havn't done network stuff before, you may encounter some design flaws that give you trouble because you didn't anticipate the multi-user environment. Just post specific issues and the folks here will do our best to answer.
Mac
"Do not delve too deeply in the arts of your enemy and so become ensnared by them"
langley_mckelvy@cd4.co.harris.tx.us
- Status
Similar threads
- Locked
- Helpful tip