I have three networks on my LAN.
10.75.18.0 /24
10.75.19.0 /24
10.75.168.0 /24
what would be the best setup on a new router that would allow all three networks to talk? This router will also route any public addresses to my firewall and WAN traffic to a WAN router on the 18 network. I also have a remote site that is a point to point routed network.
So four routers
new one with only ethernet interface
WAN router connected to corporate WAN
Firewall
Point to Point router that point over to a 10.76.0.0 network.
Everything is working now, but I have devices that cannot see my new router because it only has an address on the 168 network.
Thanks in advance for helping me to learn more about the proper configuration and teaching me more about cisco routers.
10.75.18.0 /24
10.75.19.0 /24
10.75.168.0 /24
what would be the best setup on a new router that would allow all three networks to talk? This router will also route any public addresses to my firewall and WAN traffic to a WAN router on the 18 network. I also have a remote site that is a point to point routed network.
So four routers
new one with only ethernet interface
WAN router connected to corporate WAN
Firewall
Point to Point router that point over to a 10.76.0.0 network.
Everything is working now, but I have devices that cannot see my new router because it only has an address on the 168 network.
Thanks in advance for helping me to learn more about the proper configuration and teaching me more about cisco routers.