trying to connect to a callpilot 100. Checked the ip address with a serial cable and it is default 192.168.110.10.Can't seem to connect with a web browser.Is it possible that i need to start from scratch and kill the promgramming and restart everthing or do i have a bad ethernet connection on the callpilot?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
promblems connecting to a callpilot
- Thread starter hnm1
- Start date
ptstechnician
Vendor
Is your cross-over cable good? Do you get the 10/100 light on the CP when you connect? Is your IP on your NIC in the range of 192.168.110.10? Need more info.
- Thread starter
- #3
well the cross over cable is 100% as i tested that but the nic cards ip is not in the range of the CPs ip address.I would assume that might be what is stopping me from comminicating with the CP.How do i go about changing the nic cards ip address to the same range?
lugerlover
Programmer
you need to change YOUR ip address on YOUR pc to access then if you want to change to range on YOUR network you may do soIf you do not have the knowledge on how to change YOUR ip address then google it
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
