CowboysFan87
MIS
Boot from the SmartStart CD and do a system erase. The reboot and let SmartStart re-detect all the hardware.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Proliant 3110
- Thread starter CowboysFan87
- Start date
- Status
Think the 3110 is a really old server so it might use the original SMART array controller rather than a SMART-2 or above which SmartStart needs.
SMART-1 has to be configured from within the F10 setup.
You should then be able to use SMARTStart to do the rest.
Neill
SMART-1 has to be configured from within the F10 setup.
You should then be able to use SMARTStart to do the rest.
Neill
lewishardwick
Technical User
Nope... Just manages to find an OLD schematic of the network layout, it didnt actually have an array controller/RAID controller. It seems that in its past life the server was just a processing unit and that the HDD's were infact kept externally in seperate racks! No wonder there was no controller! D'oh!
Thanks for the help anyway, must got and see if I can steal a controller fromsomewhere now... ;o)
Thanks for the help anyway, must got and see if I can steal a controller fromsomewhere now... ;o)
offkeymasterz
IS-IT--Management
- Status