Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programming Port 1

Status
Not open for further replies.
cztech

cztech

Technical User
Joined
Jul 2, 2003
Messages
416
Location
US
Does anyone know how to change the system programming port for a Magix 2.0? For example, I want to be able to program through the phone attached to the 5th port instead of the default 1st port. I thought this was an option in WinSPM, but I couldn't find it.
 
Sort by date Sort by votes
Missed that. Thanks...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

beswick
  • Locked
  • Question Question
How to get into system programming
Replies
14
Views
1K
dagwoodsystems
dagwoodsystems
Brittchick
  • Locked
  • Question Question
Partner Mail vs programming issues
Replies
1
Views
295
TouchToneTommy
TouchToneTommy
PartnerPlusNoob
  • Locked
  • Question Question
PartnerPlus 206E R3.1 only 1 port for 4 wire phone?
Replies
4
Views
452
Dexman
Dexman
mikedphones
  • Locked
  • Question Question
Remote reset or release of trunk port via WinSPM
Replies
3
Views
410
wireboy
wireboy
danmb
  • Locked
  • Question Question
Avaya Partner ACS - Port died
Replies
6
Views
505
tekguy125
tekguy125

Part and Inventory Search

Sponsor

Back
Top