Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Programming outbound Caller ID display

Status
Not open for further replies.
PumaGuru

PumaGuru

Technical User
Feb 9, 2006
1
US
Is it possible to change the outbound caller ID number through programming the MICS? Specifically, my customer would like all of their outbound calls to show up as their line 1 on caller ID displays when they make phone calls.
 
Sort by date Sort by votes
You have to change the OLI setting in line access for each extension. This is normally for setting the extensions DDI but can be set to the main number if required.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

flori1
  • Locked
  • Question
caller id
Replies
2
Views
274
curlycord
curlycord
accumatt
  • Locked
  • Question
Caller ID Not Working On Outbound Transfer Via Call Pilot 150
Replies
1
Views
327
accumatt
accumatt
Michael OConnor
  • Locked
  • Question
Caller ID Outputting weird characters
Replies
2
Views
351
Michael OConnor
Michael OConnor
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
jsaad
  • Locked
  • Question
Mics losing programming
Replies
3
Views
286
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top