Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Procomm for DOS download
- Thread starter kacrane
- Start date
Wow. What OS are you using? I've never heard of anybody that was able to get a Procomm + version lower than 4.8 to work properly on any windows system using windows 7 or higher.
I'd suggest going on the lookout for a copy of 4.8 and becoming religious. It's tough to find them.
I'd suggest going on the lookout for a copy of 4.8 and becoming religious. It's tough to find them.
- Thread starter
- #3
I have Procomm Plus32 for Windows (95) believe it or not, complete, books, box and all. Works well however:
I am looking for Procomm Plus for DOS 6.22 I have PBXs out there that I still use the DOS based program to dial into and communicate with. It works well. I keep a hard drive that is loaded with DOS and my files plus a program to slow down the processor. I change hard drives when I want to go back to Windows
I am looking for Procomm Plus for DOS 6.22 I have PBXs out there that I still use the DOS based program to dial into and communicate with. It works well. I keep a hard drive that is loaded with DOS and my files plus a program to slow down the processor. I change hard drives when I want to go back to Windows
try this
If I never did anything I'd never done before , I'd never do anything.....
If I never did anything I'd never done before , I'd never do anything.....
- Thread starter
- #5
Firebird Scrambler
Systems Engineer
Here is my copy along with a couple of the Moslo programs.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
- Status