problem with Hard disks

[netwalker1]

Dear All :
i have HP Proliant ML 350 Server
Have 10 Hard disks , connected to the RADI Controller..

From the HP Smart Start , I can see that there is 10 Hard disk Arrays ..

But when I start the SCO , there is a windows before Login list only 8 Hard disks !!

The Ciss Utilitiy which was installed inside the SCO , which is HP utility , can see 10 Logical Hard disks ..
So that , The SCO itself can see 10 , but the list before login only detect 8


Any idea ?

Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[stanhubble]

Is this a G2 or G3?
What version of sco?
Is it 10 hard disks or 10 logical disks? (or both)
Which version of smartstart ?
Which controller are you using?

( a lot of variables isn't there )

There is an updated ciss driver as of EFS v 5.60 of
July 14 03. I needed this for the 641 controller versus the 532 which worked fine with 5.0.7

 

[netwalker1]

I forgot to say that the SCO is version 5.0.6

Mohamed Farid
Know Me No Pain , No Me Know Pain !!!

 

[netwalker1]

Is this a G2 or G3?
G3

What version of sco?
5.0.6

Is it 10 hard disks or 10 logical disks? (or both)
Both

Which version of smartstart ?
V.6

Which controller are you using?
I don't Know !

There is an updated ciss driver as of EFS v 5.60 of
July 14 03. I needed this for the 641 controller versus the 532 which worked fine with 5.0.7

this is the update i am using


Mohamed Farid
Know Me No Pain , No Me Know Pain !!!