problem with drive ...urgent

[nani3456]

Hi friends,

Iam getting these error meesages in solaris 8 with veritas backup 4.5 and tld L25 tape Library.

The problem came when i manually made up, one of the driver through tpconfig, I remotly sipport i don't kknow what error messages are occurring on the lcd.
Please help me

*************************************************

Oct 14 06:00:00 nc3ft3 scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@5,1/st@1,0 (st15):
Oct 14 06:00:00 nc3ft3 Error for Command: rezero/rewind Error Level: Fatal
Oct 14 06:00:00 nc3ft3 scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block
: 0
Oct 14 06:00:00 nc3ft3 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Numb
er: 2502-078
Oct 14 06:00:00 nc3ft3 scsi: [ID 107833 kern.notice] Sense Key: Media Error
Oct 14 06:00:00 nc3ft3 scsi: [ID 107833 kern.notice] ASC: 0x53 (media load or eject failed), ASCQ: 0x0, FRU
: 0x0
Oct 14 06:00:15 nc3ft3 scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@5,1/st@1,0 (st15):
Oct 14 06:00:15 nc3ft3 Error for Command: rezero/rewind Error Level: Fatal
Oct 14 06:00:15 nc3ft3 scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block
: 0
Oct 14 06:00:15 nc3ft3 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Numb
er: 2502-078
Oct 14 06:00:15 nc3ft3 scsi: [ID 107833 kern.notice] Sense Key: Media Error
Oct 14 06:00:15 nc3ft3 scsi: [ID 107833 kern.notice] ASC: 0x53 (media load or eject failed), ASCQ: 0x0, FRU
: 0x0
Oct 14 06:00:30 nc3ft3 scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@5,1/st@1,0 (st15):
Oct 14 06:00:30 nc3ft3 Error for Command: rezero/rewind Error Level: Fatal
Oct 14 06:00:30 nc3ft3 scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block
: 0
Oct 14 06:00:30 nc3ft3 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Numb
er: 2502-078
Oct 14 06:00:30 nc3ft3 scsi: [ID 107833 kern.notice] Sense Key: Media Error
Oct 14 06:00:30 nc3ft3 scsi: [ID 107833 kern.notice] ASC: 0x53 (media load or eject failed), ASCQ: 0x0, FRU
: 0x0
Oct 14 06:00:45 nc3ft3 scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@5,1/st@1,0 (st15):
Oct 14 06:00:45 nc3ft3 Error for Command: rezero/rewind Error Level: Fatal
Oct 14 06:00:45 nc3ft3 scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block
: 0
Oct 14 06:00:45 nc3ft3 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Numb
er: 2502-078
Oct 14 06:00:45 nc3ft3 scsi: [ID 107833 kern.notice] Sense Key: Media Error
Oct 14 06:00:45 nc3ft3 scsi: [ID 107833 kern.notice] ASC: 0x53 (media load or eject failed), ASCQ: 0x0, FRU
: 0x0

 

[lenski]

Can you use robtest to load & unload tapes to check the unit is working?

 

[Vela]

What do these commands output?

vmoprcmd -d
tpconfig -d

Is this drive ina up state through the gui device monitor? It shouldn't say "AVR" mode. That means it cannot talk to your library- try upping the drive?