Problem using DN

[savvy101]

I am trying to create another phantom number but when I in put the DN I want to use (which I know is free) I am getting SCH0733 - Unable to match the inout field with the stored mnemonics. What does that mean??

TIA

 

[mikeyb123]

post your screen shot please

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.

 

[savvy101]

TN 063 0 00 10
PHANTOM
CDEN
DES PM
CUST 0
WRLS YES
WTYP DECT
MWUN 16
DN
SCH0180
DN 4255 0
MARP
CPND 4255 SCH0733
CPND 0
SCH0733
CPND 4255 SCH0733

 

[mluckie1]

The entry it is looking for at CPND is "NEW" or just hit return if you don't want or care about the internal name.

 

[savvy101]

I'm doing this in phonemaster though from a template?
I don't know each command to do it manually just yet

 

[mluckie1]

Try and remove the name in Phonemaster and see if that will work. I am not familiar with Phonemaster.

 

[savvy101]

I tried doing this manually (i found out what CLS we use etc)

Here's what I get now

TYPE: 500

TN 63 10
PHANTOM
CDEN
DES pm
CUST 0
WRLS YES
WTYP DECT
MWUN 16
DN 4242
MARP
CPND
VMB
HUNT
TGAR
LDN
NCOS
RNPG
XLST 0
SGRP
SFLT
CAC_MFC
CLS CFXA
MLWU_LANG
PLEV
FTR dcfw 11 00474545056
FTR
SCH1287

I can't find SCH1287 anywhere either

 

[savvy101]

I didn't have it set up to type any name, anything i put in there gives that result

 

[johnpoole]

did you enter hta? if so you need a hunt defined

john poole
bellsouth business
columbia,sc

 

[jebloome]

SCH1287 = The number of portable TN's in the system exceeds the number of portable TNs defined in the tape directory.

This is all that i could find out for you.

 

[mikeyb123]

what are your switch limits?

ld 22
req slt



It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.

 

[jebloome]

how many TNs do you have left that you can configure. Try outing a TN that has very little use and rebuild your phantom phone again. Your SLT print out in LD 22 will tell you how many remaing TN's you have.

 

[johnpoole]

guess i should have looked earlier,

SCH1287
The number of wireless telephones in the system exceeds the maximum number of wireless telephones allowed.

try wrls no



john poole
bellsouth business
columbia,sc

 

[savvy101]

As soon as I enter
CUST 0 and hit return, it auto fills in WRLS YES and MWUN 16

Then asks for DN.

 

[Nortellian]

are you printing or changing when it autofills.

 

[savvy101]

Creating a new handset and filling in each setting myself

 

[johnpoole]

it fills in wrls yes because someone told the switch that your on a wrls card.. out all the units on that card and for the 1st phone, new 500 wrls no.. that was a problem a few rls's back caused by copy of the 1st set to a new analog card..

john poole
bellsouth business
columbia,sc