Problem running VPN on ISA server 1

[SULK]

Hi all. We are trying to run vpn client on a isa server. I can dial in to the vpn IP, however I can't see past the ISA server to the rest of the internal network.I don't feel we are running real clean.. to many packet filters I think.
I am no expert on ISA or 2000 server for that matter,, but I do manage to get into these corners and can't get out.
I wanted to start over but I can't remove the routing and remote area cause it wont open. I could use some help.

Thanks

SULK

 

[NigelP]

Sounds like you haven't turned on routing on from within the RRAS setup. Under the IP Tab in the RRAS properties, there is a tick box to Enable IP Routing. If this isn't turned on VPN access will work, but your traffic wont get past the ISA Server.

Goto

http://www.isaserver.org/tutorials/Configuring_ISA_Server_For_Inbound_VPN_Calls.html

It should explain all the steps you need.

 

[SULK]

Thanks for the help with the VPN question.. I haven't had time to test it yet but I will check out the link you gave me





THNX

SULK