Privacy over PRI

[Johnniehec]

Hi,
Some of our extensions require to withhold their outgoing ID on PSTN calls. Previously we set "Privacy" to yes which sent the directory name only to other extensions and the base number of our DDI range to the PSTN over our DASSII trunks. Since we changed over to PRI (PRI cards in DSU cabinets) the Private tag is not preserved to the PSTN and the full extension DDI number is displayed.It's not really practical to go through the CPN substitution tables in IMAT to cater for the 150 or so extensions out of 5000 DDI numbers, and they change from time to time as well. Is there a setting on the PRI card, or COS, to preserve the Private tag and send the base DDI instead for individual extensions? It's a while since we changed to PRI but we recently switched off our GSM gateway, which didn't send any caller display, so it's now being noticed more.

Thank you,
john.

 

[kwbMitel]

Assuming 3300 based on size but please provide in the future.

you can specify CPN substitution via the Associated directory number on a Set by Set basis and I believe it takes precedence over the DID ranges table.

An import for 150 stations (or 5000 for that matter) would take minutes.

**********************************************
What's most important is that you realise ... There is no spoon.