Jan 3, 2002 #1 nhidalgo MIS Jun 13, 2001 619 US When setting bandwith priorities, is the Lower number(1) better or a higher number(200) for better bandwith.
When setting bandwith priorities, is the Lower number(1) better or a higher number(200) for better bandwith.
Jan 5, 2002 #2 spouseele Technical User Dec 29, 2001 10 BE Hi, have a look at: Q302527 HOW TO: Set Bandwidth Configuration for ISA http://support.microsoft.com/support/kb/articles/q302/5/27.aspQ302875 HOW TO: Set Up and Allocate Bandwidth Using ISA Server http://support.microsoft.com/support/kb/articles/q302/8/75.aspQ311488 Bandwidth Rules Are Not Available in Cache Mode http://support.microsoft.com/support/kb/articles/q311/4/88.asp Also, the December newsletter on http://www.isaserver.org/pages/newsletter.htm have a very nice article about 'Configuring and Troubleshooting Bandwdith Rules '. It's definitely worth to have a look at it. Hope this helps, Stefaan Upvote 0 Downvote
Hi, have a look at: Q302527 HOW TO: Set Bandwidth Configuration for ISA http://support.microsoft.com/support/kb/articles/q302/5/27.aspQ302875 HOW TO: Set Up and Allocate Bandwidth Using ISA Server http://support.microsoft.com/support/kb/articles/q302/8/75.aspQ311488 Bandwidth Rules Are Not Available in Cache Mode http://support.microsoft.com/support/kb/articles/q311/4/88.asp Also, the December newsletter on http://www.isaserver.org/pages/newsletter.htm have a very nice article about 'Configuring and Troubleshooting Bandwdith Rules '. It's definitely worth to have a look at it. Hope this helps, Stefaan