Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Printing multiple pages produces wrong size

Status
Not open for further replies.

SewHelpMe

Technical User
Jan 26, 2015
1
0
0
US
I am creating vector images and setting the final size. I then select the properties in my printer to print to poster. It prints to poster format, but the output is considerably larger than the input. In other words, I had set the dimensions to about 12" wide x 15" high, but when printed and taped back together, the result was about 15" wide x 18-1/4" high (about 1/4 of the original size greater). Where do I even begin to fix this problem?

Some specific details which may or may not be of assistance:
file type is PSPIMAGE
image type is VECTOR
72 PPI
RGB 8 bits/channel
1 layer

PSP Printer settings
orientation 1
fit to page

Printer Canon MX80
media type plain paper

print quality standard
portrait
paper size: standard
layout: poster printing

One of my files uploaded to play with if needed. Currently set to about 9.25" wide x 12" high
 
 http://files.engineering.com/getfile.aspx?folder=40c4a3e2-fd62-404e-92a9-c415f0933292&file=Gangster.pspimage
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top