Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

printer will not print as setup

Status
Not open for further replies.

Benjaminle

IS-IT--Management
Jan 22, 2002
120
US
I have two identical dot-matrix printer Okidata ML320. The are both has the same configuration but one is old and one is new. I am having problem printing on the new printer. I use the same driver and everything but the font that came out of the new printer is too big compare to the old printer. Why is it when I print in Macola that I have this issue. I use the printers to print any other applications and the printing are identical.
 
Try this - on the screen that pops up after you select the report for printing there is a "use font dialog box" button. Select that and when you select ok you will get a screen giving you the option to use a particular font. Select the one you want. I think there is another fix for this that is better, but this shold work for you for now
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top