I have a printer to serial port convertor. My laptop is without a serial port and I just so happen to have a device that has a serial connection. Everything fine and dandy so far. Until I get to the hyper terminal session only to find that it will not transmit through a printer port. Does anyone know how I can send AT strings through the printer port to the device on the other side of the convertor??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printer to Serial
- Thread starter HebieBug
- Start date
in DOS copy con lpt1: should do it. Ed Fair
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Status
Similar threads
- Locked
- Question
- Locked
- Question