Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Print report design view in access
- Thread starter Sylvialn
- Start date
Syl
jimmythegeek
Programmer
Do you need to do it programatically, or do you just want a picture of it?
If the latter is the case, then when your report is in design view, hit the "Print Screen" button (above the home, end, etc. buttons). Then open either Paint, or Word, and go to Edit | Paste. Then print it out. Jim Lunde
compugeeks@hotmail.com
Custom Application Development
If the latter is the case, then when your report is in design view, hit the "Print Screen" button (above the home, end, etc. buttons). Then open either Paint, or Word, and go to Edit | Paste. Then print it out. Jim Lunde
compugeeks@hotmail.com
Custom Application Development
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question