handleisinuse
MIS
Hi!
I want to print the protocoll of a job after every backup.
How can I manage it?
Thanks
Kevin
I want to print the protocoll of a job after every backup.
How can I manage it?
Thanks
Kevin
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Print job protocoll
- Thread starter handleisinuse
- Start date
- Status
NickFerrar
MIS
Not quite sure I understand your question. Do you want to print a copy of the activity log after each backup?
If so you need to configure alerting (this is a separate service and program to configure it). Within alerting I do printing via the Trouble Ticket option, after that's set up you need to set the alert options on the job itself.
If so you need to configure alerting (this is a separate service and program to configure it). Within alerting I do printing via the Trouble Ticket option, after that's set up you need to set the alert options on the job itself.
- Status
Similar threads