Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Primary DC

Status
Not open for further replies.

cc929

IS-IT--Management
Nov 21, 2003
127
US
Hi All,

Just added a new w2k3 server to the network and act as parallel DC with w2k DC.
I would like to make the new W2k3 DC be a primary DC.
What should I do?
How do i know the main/primary DC is in the W2k3 server?

Please advise!

Thanks!

cc929
 
There is no PDC or BDC with Windows 2000/2003 server.

For the W2K3 server to act as a DC you need to first upgrade the active directory schema by running adprep from the W2K3 CD (If its 2003 R2 then you need to run adprep from the second CD).
Then you can run dcpromo to make the W2K3 server a domain controller.

Some reading;
Common Mistakes When Upgrading a Windows 2000 Domain To a Windows 2003 Domain

How to upgrade Windows 2000 domain controllers to Windows Server 2003

What are the FSMO Roles in Active Directory?

All you need in this life is ignorance and confidence; then success is sure.
- Mark Twain
 
If the W2K3 server has already been promoted to a DC, then all you need to do is transfer the FSMO roles. There are 5 roles, if you intend on transferring all of them. Or, you could split the FSMO roles between the DC's. However, this is usually only done for larger-scale deployments.

Hope This Helps,

Good Luck!
 
You'll also need to update some things in Exchange if you're using Exchange. Also, are there any other services running that need to be moved, such as DNS, DHCP, etc?

Pat Richard, MCSE MCSA:Messaging CNA
Microsoft Exchange MVP
Want to know how email works? Read for yourself -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top