Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI232
- Thread starter Labash
- Start date
It looks like a protocol mismatch, with one side sending messages the other doesn't recognise, here's the NTP entry for the message:
PRI0232 Protocol Error: PROGRESS INDICATOR not supported. Output data: DCH: x
DATA: y . Where: x = D-channel number and y = Message type.
Posting the Meridian and Cisco config might give people a bit more to work with.
When I say protocol mismatch, you might have the same protocol at both ends but different versions, ie 1 end basic QSIG while the others QSIG GF for example.
PRI0232 Protocol Error: PROGRESS INDICATOR not supported. Output data: DCH: x
DATA: y . Where: x = D-channel number and y = Message type.
Posting the Meridian and Cisco config might give people a bit more to work with.
When I say protocol mismatch, you might have the same protocol at both ends but different versions, ie 1 end basic QSIG while the others QSIG GF for example.
- Status