PRI 1

[MJSD333]

Hello,
Got a customer that we installed a PRI code on their MOD 6.1.
It was installed about 6 months ago. The cutover was at the same time. Cutting from T1 to PRI. The day the cut took place it was understood that it was changing to PRI from T1.We programmed the MOD to PRI after installing the PRI code. Tried to cut over and it wouldn't work. After some questions it was found that all XO was doing was adding Caller ID to the T1. So we had to switch the MOD back to T1 from PRI. My question is, is the PRI still valid and in place on the MOD after changing the programming back to T1 from PRI.
Thanks,
Dmac,

 

[senk1s]

yes the PRI keycode is stuck with the system ID

later on if they add a PRI, it is just programming

 

[MJSD333]

Thanks senk1s,
I thought it might be that way. Just wanted to be sure.They are adding a PRI this Friday. Thanks again
Dmac,