Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI to SIP 2

Status
Not open for further replies.
petefish

petefish

Vendor
Joined
Jan 21, 2010
Messages
97
Location
GB
Anyone know if there is a quick way of changing the line group ID in incoming line Route. I have about 200 DDI on the ISDN30 that I'm moving over to SIP, so will I have to change each individual DDI.
Thanks for any Ideas.
 
Sort by date Sort by votes
Just replace them using the MSN configuration tool.

| ACSS SME |
 
Upvote 0 Downvote
Yea looked at that but they all have different destinations and time plans so it would be easier to just change the incoming call group for each one. Its not really a problem but was hoping there was a simple way.
 
Upvote 0 Downvote
Swap the incoming ID on PRI and SIP, reboot, done.
 
Upvote 0 Downvote
That seems the way I have just tried it on a download and seems ok so when I'm back in the office I'll try it on our dem kit. Thanks for the help guys
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question Question
cannot find a suitable SIP URI to dial out | SIP Error
Replies
6
Views
690
MikeeOK
MikeeOK
rsv23
  • Locked
  • Question Question
SIP Trunk Routing
Replies
3
Views
597
rsv23
rsv23
L
  • Question Question
Mobile Twinning and SIP Trunk Usage
Replies
4
Views
173
finest
finest
Michel$
  • Locked
Convert j159 SIP to H.323
Replies
11
Views
1K
William C290
William C290
MiamiMax
  • Locked
  • Question Question
SCN PRI ICR entry
Replies
2
Views
438
derfloh
derfloh

Part and Inventory Search

Sponsor

Back
Top