ptstechnician
Vendor
Have a customer with 4.1 MICS software and pots lines. They want to go to a PRI. They have a NAM (4.0.04A). Two questions - Is MICS 4.1 software stable enough for a PRI and if I go to MICS 7.1, will the NAM work with it? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI Question
- Thread starter ptstechnician
- Start date
- Status
allworxguy
Vendor
4.1 is not a good choice for PRI
6.1MR or higher is my recommendation. NAM 4.1 required.
Marv
6.1MR or higher is my recommendation. NAM 4.1 required.
Marv
curlycord
Programmer
I think you will need to upgrade the NAM to 4.1 even though you stay at 4.1 on the KSU when adding PRI, somebody may confirm.
=----(((((((((()----=
curlycord
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question