PRI Question

[chs89]

We have a MICS 6.1. We have a DID PRI. Before the PRI, we had two T1s with channel banks. Well, we have a very important number that we need to move over to the PRI, before we disconnect the old T1s. The telco company is telling us that they can send this number to a specific channel in the PRI - in this case channel 18. My question is - What do I need to do in the phone system in order to make this work? The line will be going to a fax line.

Thanks.

 

[serviceboy]

need to be sent in based a recieved digit...can not channelize"can not assign a specific channel off a PRI t1" a PRI t1... just set up like a regular t1 DID and will be fine

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.