Jan 30, 2009 #1 werhol2303 Technical User Joined Apr 10, 2006 Messages 69 Location US Is replacing PRI modulein IP Office 500 as easy as shuting down the system replacing module for new one, powering back up then run the upgrade?
Is replacing PRI modulein IP Office 500 as easy as shuting down the system replacing module for new one, powering back up then run the upgrade?
Jan 30, 2009 #2 TomMills Technical User Joined Jan 16, 2008 Messages 5,563 Location GB no need to upgrade after. just swap the cards Upvote 0 Downvote
Jan 30, 2009 #3 Maxwell1001 Vendor Joined Nov 27, 2008 Messages 722 Location US yes as long as your not swapping a legacy carried with pri card to new version of pri...then you will need to upgrade if your on less than 4.1 Upvote 0 Downvote
yes as long as your not swapping a legacy carried with pri card to new version of pri...then you will need to upgrade if your on less than 4.1
Jan 30, 2009 Thread starter #4 werhol2303 Technical User Joined Apr 10, 2006 Messages 69 Location US I'm on 4.2. Thanks! Upvote 0 Downvote