cmos2001zm
Technical User
What is the step by step procedure of installing a PRI card on option 61C
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI card Installation
- Thread starter cmos2001zm
- Start date
- Status
add the card to the cequ in 17, prt the cequ in 22.. then build a adan dch in 17 then build a route (16) then build 23 trunks (14). if you need the code, let us know, the far end interface type has to be right as well as the coding... if the provider used b8zs then you match that and apply superframing..
\
after you build it, ld 96 dis msdl x all enl msdl x fdl, ld 60 enll x, 60 seconds later the dch will establish..go home, take the rest of the day off.. this build take about half an hour on the outside
john poole
bellsouth business
columbia,sc
\
after you build it, ld 96 dis msdl x all enl msdl x fdl, ld 60 enll x, 60 seconds later the dch will establish..go home, take the rest of the day off.. this build take about half an hour on the outside
john poole
bellsouth business
columbia,sc
- Status
