Prevent conferencing of bridge ports

[RFWatts]

It looks like I have a user that has gotten wise to the idea of conferncing two conference bridges together to create a larger bridge. Normally, this wouldn't be a big deal, but the two bridges remain connected once the user drops out, causing the two separate bridge lines to be bridged together until I busy-out the port. I tried changing the system-feature "Abort conference upon hang up", but this affected our assistants that setup calls for their executives. Is there a way to prevent conferencing or transfering of calls to these line-side stations?

Thanks in advance for your help!

Mike

 

[koglass]

Have you tried making each VDN in the Conference different CORs and not allowing the CORs to talk to each other. For instance COR 50 for one VDN and COR 51 for another. 50 will have a n next to 52 and 51 will have a n nect to 50 on the Calling Permissions page.

 

[RFWatts]

Koglass

Unfortunately, this isn't a Meet-Me conference. This is actually a Consortium bridge that is integrated via a line-side T1.