presentation of did numbers

[kank]

Hi All,

I want to present my DID numbers to the public network while calling outside. My DID series is 9991000 to 9991099. My stations are from 1000 to 1099. When these stations calls outside (for example station: 1055) I want to show to called party from which DID number I'm calling from (as 9991055). So they can reply on missed calls. There must be parameters on station form and parameters & features forms. I tried some but couldn't succeed. Can you help me to find it out?

Regards

 

[manfmmd]

This will get you where you need to be IF you have ISDN-PRI trunks to the LEC.

change public-unknown-numbering 4                               Page   1 of   2
                      NUMBERING - PUBLIC/UNKNOWN FORMAT
                                   Total                                   Total
Ext Ext    Trk       CPN            CPN Ext Ext    Trk       CPN            CPN
Len Code   Grp(s)    Prefix         Len Len Code   Grp(s)    Prefix         Len

 4   1               666999         10

Note, this is for a CM 3.1 system. What platform are you using?

This is for CM 4.0:

change public-unknown-numbering 4                               Page   1 of   2
                      NUMBERING - PUBLIC/UNKNOWN FORMAT
                                           Total
Ext Ext           Trk       CPN             CPN
Len Code          Grp(s)    Prefix          Len
                                                     Total Administered: 41
 4  1                       666999          10          Maximum Entries: 9999

 

[kank]

I'm using 5.1.
Do I have to change any other setting on trunk pages or station?