PPP route to Internet

[FortKnox]

I am dial-up networking to my router which also has a T1 connection to the Internet. I am authenticating my login off of a RADIUS server.

When I dial-in, I can access anything on the LAN, but not on the Internet via the T1 connection to the Internet.

I was thinking maybe I needed a static default route, but I dont think that worked. For example, if I wanted to get to yahoo.com at 216.109.112.135 I entered 'ip route 216.109.112.135 255.255.255.255 63.144.0.69' b/c when I trace route to yahoo.com from the router itself, its first hop is 63.144.0.69 but when I try to trace route to yahoo.com from the laptop that is dial-up networked it only shows the first hop as 172.16.1.10 and wont go any further than that.

Any help appreciated. Txs.

 

[plshlpme]

do you have any access lists created on the router which don't include your laptops ip?

you should just create a default route and point it to your gateway supplied by the ISP.. or you can just point it at your T1 interface going to the internet...

 

[FortKnox]

Here is what I see as far as that is concerned:

access-list 101 permit ip any host 192.168.0.6
access-list 101 permit ip any 192.168.0.0 0.0.0.255
access-list 102 permit ip host 192.168.0.8 any
access-list 102 permit ip host 192.168.0.2 any
access-list 170 permit icmp any any
dialer-list 1 protocol ip permit

Some of those access list should be void, like I know we dont use 192.168.0.6, or 192.168.0.8, or 192.168.0.2 anymore....so you say I need one for my dial-in IP ranges?

 

[plshlpme]

do you have nat set up on the router?
that is the access list i was talkig about..
to nat the connection to the internet.

i guess youll need to show more config so that we can see how you are doing it..

 

[rtfmdude]

yeah, sounds like a nat problem - you might want to change the local pool that you have configured to hand out addresses to your dialup clients to an address range that lives on your ethernet - the router should proxy arp for your dialup box.