I would like to configure the AUX port on our 2610 router to accept windows dialup networking connections. I want to be able to connect to the aux port and receive an ip address something like an ISP would do. Then be able to access the network. I am using a Cisco 2610 IOS Version 12.2(8)T with a US Robotics Sportster 33.6 modem. I want to use encapsulation PPP. Please help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PPP on AUX port
- Thread starter techthug
- Start date
Take a look here:
It is not your exact scenario, but may give you an idea...
Good luck.
It is not your exact scenario, but may give you an idea...
Good luck.
- Status
