Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PPP Multilink

Status
Not open for further replies.
JH24

JH24

MIS
Joined
Jun 18, 2001
Messages
68
Location
GB
I can create an ISDN bundle of two B-channels from the same Bri interface but cant get more B-channels to connect to this bundle from other Bri interfaces.
I am using a Dialer and putting the Bri's into a Rotary group.

Thanks
 
Status
Not open for further replies.

Similar threads

cisco123456
  • Locked
  • Question Question
887va-K9 - Configuring a Fast Ethernet switch port as a WAN interface with PPPoE
Replies
1
Views
537
cisco123456
cisco123456
KodiakAK
  • Locked
  • Question Question
T1 link (ppp?) between router and Dslam
Replies
3
Views
268
KodiakAK
KodiakAK
telnettech
  • Locked
  • Question Question
Slow Upload over multilink ppp with Cisco IAD2431
Replies
1
Views
117
telnettech
telnettech
jatkins
  • Locked
  • Question Question
One T1 causing errors in multilink
Replies
0
Views
128
jatkins
jatkins
mat420
  • Locked
  • Question Question
Encapsulation, hdlc, frame relay, ppp, chap, rip, acl
Replies
0
Views
185
mat420
mat420

Part and Inventory Search

Sponsor

Back
Top