Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

powerbuilder telnet

Status
Not open for further replies.

jjaroska

Programmer
Joined
Nov 16, 2010
Messages
3
Location
US
does anybody have example code of a telnet app written in powerbuilder using winsock?
 
yeah. i checked that site out but it only has the winsock non-visual. no sample code. i need a little more than that at this point. i have dropped the visual microsoft winsock control onto a window and connected it successfully, but the data_arrival event is not firing. any suggestions?
 
correction. i have downloaded the zip file and taken a look at the sample code. however, when i try to connect to a server on port 23, the telnet port, all i get back is a square. what am i missing?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top