Spec= AMD-K6-2-500AFX, 64meg DIM, Motherboard Jetway J-542C. Bios Award Modular v4.51PG. v.542CS D06 10-25-2000.
I am putting together a system based on above spec, with an AGP display adaptor, on boot up I get a POST error beep, one long three short, and no display.
I tried a different known working AGP card (ATI Rage 128 XPert 2000), same result, I tried a PCI display card and everything worked fine.
My conclusion: the AGP port don't work, but am I correct, is there something I am missing, could there be any other reason the AGP cards don't work? Some BIOS setting? Speed of AGP port don't match speed of card? Any sugestions/advice, appreciated.
Regards, TopHat2.
I am putting together a system based on above spec, with an AGP display adaptor, on boot up I get a POST error beep, one long three short, and no display.
I tried a different known working AGP card (ATI Rage 128 XPert 2000), same result, I tried a PCI display card and everything worked fine.
My conclusion: the AGP port don't work, but am I correct, is there something I am missing, could there be any other reason the AGP cards don't work? Some BIOS setting? Speed of AGP port don't match speed of card? Any sugestions/advice, appreciated.
Regards, TopHat2.
On advice from "butchrecon" (in another forum)