Ports. 1

[thegirlofsteel]

How do you see if there are any available ports on the circuit board using the computer. I hate fumbling through the wiring noodles!!!

 

[84Mike]

'list configuration all' to see entire system
'list configuration board 01a03' where '01' is cabinet 1, 'a' is carrier a, and '03' is slot 3.

If you have TTI enabled. free ports will have a 'p', otherwiase, they will have a 'u'.

 

[adminman3]

Also, to see which stations are assigned to a common board, try 'list station port XXXXXX' which is your board location. It will return all the stations translated with a port from that card.

 

[thegirlofsteel]

You all are the bomb!!!! Thanks so much. Very Very Much!!

 

[Duaneness]

Hey adminman3 - I've been working with the Avaya platform for more years than I care to say, and I never knew that command! A star for you!!!!

Thanks!

- Duaneness

 

[2BAvoice]

list config station, and you see only stations (well including ds1)