Port Forwarding on Pix 501

[Mustang90]

Hello
i am having problems forwarding ports on my Pix 501
I have never forwarded a port on it before and don't know how to use it
I know how to get onto it but from there I am lost
I would appreciate it if someone could help me out ande give me step by step instructions on how forward a port on my Pix 501
Thanks in Advance
-Mustang90

 

[Mustang90]

I have tried using the CLI interface and i don't know what to do there
But I perfer to use PDM this is the step by step instructions I would like
How to Forward Ports on my Pix 501 using PDM
Thank You in Advance
-Mustang90

 

[mbilgrav]

no matter what you use - here is the concept:

you add a static command (NAT translation) from fx interface to inside IP of the forward-to host.

you add ACL giving what is permitted.

you add ACL to the outside interface.


I never uses the PDM, as it will likely mess around with your cfg at some point.

post you present config and state what you what to do