Polling Question

[misjay01]

Hello,

I currently have a sunfire v120 with dual interfaces eri0 and eri1.

We have a device that is constantly being polled and although I have restricted polling to specific devices via openview which has stopped on interface eri0 it still seems to poll via interface eri1.

Is the anyway I can stop polling via interface eri0 ?

TIA
-----------------------------------------------------------
sunfire_v120# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.17.250.35 netmask ffffff00 broadcast 172.17.250.255
groupname ipmp-grp
ether 0:3:ba:2d:79:8e
eri0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER>
mtu 1500 index 2
inet 172.17.250.44 netmask ffffff00 broadcast 172.17.250.255
eri1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.17.250.36 netmask ffffff00 broadcast 172.17.250.255
groupname ipmp-grp
ether 0:3:ba:2d:79:79
eri1:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER>
mtu 1500 index 3
inet 172.17.250.45 netmask ffffff00 broadcast 172.17.250.255
sunfire_v120#