Point to Point VPN

[mwanika]

Dear Tecks!

I want to setup a point-to-point connection which can also be a VPN. my Lan on side A is 192.168.1.0 and on side B is 172.16.1.0. I have a dedicated leased line and cisco 2600 router on both side.

Hoevere on side be i also have another network 172.16.2.0 which will share the same link to the main office at point A and access the internet. How do i setup this so that LAN 172.16.2.0 "only" access the internet and should not be part of the VPN?

Please assist

Regads
dnice4d

 

[pmesjar]

When configuring VPN you have exact control which hosts will be able to initiate and form IPSec tunnel. Everything is controlled via access-lists. I will advise you to do some search about VPN on

http://www.cisco.com/univercd

as this will surely get you lot of responses on setting up VPN connections.

Peter Mesjar
CCNA, A+ certified
pmesjar@centrum.sk