pls help for Avaya IP-DECT install

[garychanMM]

Hi all ,

i have some question about DECT phone subscribe, information as below
Avaya IPO : 10.1
IP-DECT :IPBS2[7.2.22 C], Bootcode[7.2.22], Hardware[IPBS2-Z3A/1A]


IP DECT-Line from IPO , enable Provisioning + pre-configured & enter SARI code
Extension -> enter IPEI code . & create base user

In Mask IP-DECT base station side ,
Services -> Provisioning Enable

Actually, i can subscribed one DECT handset phone 3720 , when i entry SARI code from IPO . ie.31100XXXXXX
Now , i need subscribe another one 3720 phone . how can do it , because i try to entry new SARI code (IPO->IP DECT LIne) for this phone.
After result, this phone can subscribed , but first 3720 phone will display " SEARCHING" .
How can i subscribe more than one DECT phone in Mask base station and activate that. Please help

 

[intrigrant]

Well, sounds you have a long way to go on IP Office and starting here is a bad idea.
When coming here with your question we expect at least you have basic knowledge how to set up a system starting with nothing.
As this is not Avaya universty so i suggest you start there or hire a engineer who knows his/her stuff and willing to get you on the go.

 

[derfloh]

The docs about IP DECT are really straight forward and easy to follow.

 

[shamorau]

Not to harp on the point, but a quick google search helps with info

i used this to help on my DECT installs etc. it is pretty much follow the bouncing ball with DECT.

https://downloads.avaya.com/css/P8/documents/100152396