Hi, new to this site and stressin at the moment. I am learning cisco and am playing with a cisco 2611. I have erased the ios completly for training purpose. I successfully xmodemed an ios image to it but wont load. It says theres not enough available mem. when i hyperterm into the router all i get is this...
and it doesnt let me back into rommon mode either. im stuck. the image xmodemed perfect but the problem is loading the image.
Thank you...below is the error
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe786c8
Error : memory requirements exceed available memory
Memory required : 0x02637268
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd
*** Machine Check Exception ***
PC = 0xfff14e3c, Vector = 0x200, SP = 0x81fffe28
and it doesnt let me back into rommon mode either. im stuck. the image xmodemed perfect but the problem is loading the image.
Thank you...below is the error
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe786c8
Error : memory requirements exceed available memory
Memory required : 0x02637268
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd
*** Machine Check Exception ***
PC = 0xfff14e3c, Vector = 0x200, SP = 0x81fffe28